There are a number of reasons why a faucet handle may need to be removed.
Maybe the cartridge is worn out and needs to be changed. Or the filter is filled with impurities and needs to be cleaned. Maybe there is a leakage that needs to be looked at. Or perhaps the faucet needs to be replaced altogether.
Whatever the reason, the faucet handle needs to be removed. But there are no screws around to do so.
So how to remove the faucet handle without screws? Well, time to find out!
Remove Faucet Handle without Screws | Step By Step Process
If you want to know the process of removing the faucet handle without screws, you have come to the right place. Read on to find out how to do so, step by step.
Step 1: Gather All the Necessary Tools
No need for screws if some other tools are there to help. So to start, gather all the necessary tools first.
Mainly required tools include an Allen wrench, a flat head screwdriver, a pair of pliers, a faucet handle puller, an old piece of cloth, and some lemon or distilled white vinegar.
Step 2: Turn Off the Water Supply
Look underneath the sink for the turnoff valves. There should be two valves, one for the hot water supply line and one for the cold water supply line.
Grab hold of one of the valves and rotate clockwise till tightly closed. Do the same for the other one. Make sure not to over-tighten the valves.
Twist the faucets open to allow all the left-over water to run out.
Step 3: Pop Off the Cap
A small cap is located at the base of the faucet handle. Take the flat head screwdriver. Slowly and gently work the screwdriver inside and around the edge and pry off the cap.
If there is no cap at the base of the knob, look around at the sides. Locate the small cap at the side of the faucet handle. Pop off the cap with the help of the flat head screwdriver.
Step 4: Cover the Drain
Make sure to cover the drain before anything else. Otherwise, small parts like the screw may fall into the drain and get lost, with no chance of recovery whatsoever.
Step 5: Remove the Screw
Locate the screw and slowly remove it with the help of the Allen wrench. In the case of setscrews, make sure to find the wrench in the right size and then use it to remove.
Take the screw and keep it aside for later.
Step 6: Pull out the Faucet Handle
Grasp the faucet handle and pull it out. Due to the fact that it is firmly secured, make use of the pair of pliers or the faucet handle puller for the task.
Wrap the base of the faucet handle with an old towel to prevent any scratch marks on the surface and maintain a lustrous appearance.
Afterward, get either the pliers or the puller and use it to pull out the faucet handle in one smooth motion.
Step 7: Clean the Area
Take notice of the amount of water mineral deposits around the area. Make a mental note of the approximate amount of substance required to clean the whole area up. Measure out some lemon or distilled white vinegar accordingly.
Gently slosh the lemon or vinegar over the area with the mineral accumulations. Leave for a while, or at least a long enough time for the minerals to dissolve into the liquid. And then, wash away. Use any kind of brush to clean the area further if necessary.
Some More Things to Know about Faucet Handles
Sure, it is important to know about removing a faucet handle without screws for many reasons, but there are more things to know about faucet handles.
Interested? Well, time to dive in and know more!
A Faucet Handle
A faucet handle is one of the most important parts of a faucet. With the help of a handle, a faucet can control the release and flow of water. It is as simple as a flip of a handle, which allows a faucet to let out water.
Types of a Faucet Handle
The faucet handle is mainly of two varieties: a single-handed faucet handle and a double-handed faucet handle.
A lever handle, a blade handle, and a cross handle are some other types of the faucet handle. They depend on whether a faucet is single-handled or double-handled.
- A Lever Handle
The lever handle works for both a single-handled faucet and a double-handled faucet, and so it is pretty much perfect for any kind of faucet. A lever handle is either a single lever or a double lever.
Now, the single lever handle is manipulated vertically to control the water flow and horizontally to regulate the water temperature. It is found in ball faucets, disc faucets, and single-handled cartridge faucets.
On the other hand, a double lever handle is made up with a left handle, which regulates hot water flow, and a right handle that regulates cold water flow. It is found in compression faucets and some cartridge facets.
- A Blade Handle
A blade handle is really beautiful in appearance. It is also easily manipulated. A simple flick is more than enough to maintain the water flow. It tends to be double handled, and so it is mainly found in compression faucets and double-handled cartridge faucets.
- A Cross Handle
A cross handle is made up of a metal or porcelain attachment. This one is x shaped or cross-shaped, if the name is not enough to make it obvious. It is necessary to twist and turn it to release water. This thing is perfect for double-handed faucets, and so it is found in compression faucets and double-handled cartridge faucets.
It is of key importance to consider different factors and then choose a faucet handle. While function is definitely a major point, it is also really cardinal to check out the number and the aesthetic of the handles, and only then make a choice.
Conclusion
Congratulations! Now you know how to remove the faucet handle without screws and loads of other important things to know about the faucet handles themselves.
So, the next time you are in a pinch about faucet handles, you will have absolutely nothing to worry about. Rather, you can face everything thrown at you and make only the best choices.